As we were testing AM32 and ESCape32 ESCs, we were very impressed with the little Sequre 2670 ESCape32 unit. It performed flawlessly with the Turnigy Aerodrive 4250 500kv motor driven with a 4S battery. We especially appreciated the additional telemetry that it could provide direct to our ExpressLRS receiver.
However, when we installed it in our little Hobbyking MX2, powered with a Dualsky ECO 2826C 850kv motor, the motor quit less than half way round the first circuit! Subsequent to that we tried it with a little R3115 900kv and 6S battery. It performed flawlessly in extensive testing.
Putting it in the test cart with the Dualsky 2826C, we were able to again observe the motor cutting out at high revs.
We are appealing to you, our readers, subscribers and viewers for assistance in working out what the problem is. So, add your comments here or on our YouTube channel. Here is a link to the video, followed by the downloadable document showing the ESCape32 settings used. I might mention that the initial failure occurred with timing set on 30, and we then reduced that to a more ‘normal’ 20 for the recent testing, in which the motor continued to cut out.
(Video not available until Friday afternoon, Sydney time)


